Auto Detailing
Tools
Back to Tools
& Accessories
Deluxe
Auto Detailer with Vacuum and Water Hose:
3.5" Stainless head with valve trigger and jet. 1.5" vac
hose with metal end and cuffs, also has solution hose inside vac hose for
protection and easy handling. Swivel cuff to prevent kinking and binding.
25' Item
#AA091
30' Item #AA092
Deluxe Auto Detailer
with Internal Spray Jet:
Low moisture and no overspray. Also includes:
-
3.5" Stainless head with valve
trigger and jet
-
1.5" Vac hose with metal end and
cuffs
-
Solution hose inside vac hose for
protection and easy handling
-
Swivel cuff to prevent kinking and
binding
25' Item
#AA095
30' Item #AA096
Pre-Spray Nozzle
and 1/8" with Male Quick Disconnect:
Eliminates chemical mixing and low performance pump sprayers.
Attaches to chemical injector to apply hot premixed prespray shampoo and rinse
solutions.
30' Item
#AA111
40' Item #AA112
50' Item #AA113

Auto Detail Cleaning Station:
Vacuum inlet with water outlet, pre-spray outlet, on/off switch,
vacuum and pre-spray hanger, hose hanger and tool/hose hanger all in one.
Item #AA124
The Restorator:
The Restorator is an ideal unit for treatment in vehicles and
areas up to 20,000 cu. ft. Load the compact machine with an industrial
cartridge and turn it on. Cartridges are rated for up to 200 hours of
service.
Item #AR38
Hot Fogger, Electric:
This versatile fogger creates a dry fog, similar in nature to the
smoke created by a fire. This dry fog follows the path of smoke, and
neutralizes the odor. Can be used as a solvent sprayer by simply removing
the heating barrel. Comes with a durable aluminum solution tank.
Item #AS42
Hydro-Zone:
Eliminates smoke, pet odors, mold, mildew and more.
Excellent for freshening up cars, buses, boats and aircraft. 2.65
grams/hr. 7.95 p.p.m.
Item #AS31
Air King Blower:
Speed dry upholstery or carpet after cleaning or spotting with
this pivoting utility blower. Direct the air where you need it with the
infinite number of blower head positions. Use it to cool you while your
working in the heat. You can feel the Air King pushing air 50 feet from
the unit.
Specifications:
-
Two 120 volt grounded outlets
which can be used to "plug-in" other tools or other blowers.
-
Ten-Foot cord with grounded plug
-
Pivoting blower head
-
Circuit breaker with reset button
-
3 Speeds
-
0.8 Amp current draw on High
setting
-
Fully assembled for immediate use
Item #AC081
Olympus M100 • M100H
Extractor
Standard Features:
- 12 gallon capacity
- 5 year warranty on rotationally molded
polyethylene body
- Large motor cavity–easy access
- Top mounted control panel
- 3.5” stainless auto detail tool
- Large, partially pneumatic stair climbing
wheels
- Motor cavity cooling system (patent pending)
- Professional look and durability
- No drip motor cavity– Spills on the outside
can’t get inside!
- Double ball bearing, patented air seal bearing
and epoxy painted fan case vacuum motors
- Rated at 81.8 inches vac lift, 97.0 CFM per
motor
Model
Specific Features
|
M100
- 100 psi water pump
- Dual 2-stage Lamb vac motors
- 25’ vac and water hoses
- Single cord
- Flojet’s new Duplex II pump
- Viton-fitted for chemical resistance
- Steady pressure for nearly any tool
- Amp draw: 14.5 wide open, 9.25 full load
|
M100H
- 100 psi water pump
- Dual 2-stage Lamb vac motors
- 25’ vac and water hoses
- Dual cord
- Heater - 1750 watt with 195º thermostat
- Flojet’s new Duplex II pump
- Viton-fitted for chemical resistance
- Steady pressure for nearly any tool
- Amp draw: Cord 1: 14.5 wide open, 9.25 full load. Cord 2: 13.13 heater
- High-heat safety limit
|
Optional Tools
- Stainless Crevice Tool
- 4.5”Auto Detail Tool
|
- Carpet Wand
- Hard Floor Wand (Brush and Squeegee Head)
|
Back to
Tools & Accessories |